Calendar
April 2013
SunMonTueWedThuFriSat
« Mar Jun »
 123456
78910111213
14151617181920
21222324252627
282930 
Recent Comments

Log in
Email me at:

The Moles are Taking Control

The Moles have started moving in folks. As stated in a previous post I was having difficulty controlling two Bullfrogs with one control rod due to the lack of space requires for the linking control rod having too sharp a radius. A friend of mine showed me a link to The Mole’s and I thought why not and purchased three of them to give them a try. The Moles are not very big at all and quite convenient which was what I was looking for however once I received them they were still just a little too long to work in their intended installation method. Hmmmm what to do? The Mole comes with two control rods connected to a rotating shaft, one to control the turnout and the other to route the power to the frog. What I did probably voided any Warranty but then again that’s what model Railroaders do….. Right? I decided to mount the Mole sideways so I drilled an additional hole in the shaft so the control rod for the turnout was rotated 90 degrees from its original location.

 

The Mole before I put it together but after I drilled the  extra hole.

The Mole before I put it together but after I drilled the extra hole.

Not very big huh?

Not very big huh?

 

Completed Mole

Completed Mole

 

Completed and installed (Carpet tape version)

Completed and installed
(Carpet tape version)

My first attempt at getting these attached to the bottom of the layout has proven interesting and I may have to rethink how I fastened them to the layout. My first attempt was to cut a narrow strip of thin plywood and fasten it to the side of the Mole with Carpet tape. I would then adjust the Mole into the perfect position then screw the strip of plywood to the layout. The tape on one of the three Moles let go after a week or so. I’m not sure if it is a sign of what is to come or I just didn’t apply enough pressure when I fastened the two pieces together. A good friend of mine told me to use two part epoxy and Velcro as he has used it without fail on his layout. For now I am going to do this to the one that fell off and wait and see if the other two hang on or fall off.  I’ll call it an experiment but if you want to call it lazy, I’ll accept that too 🙂 I am using a rotary switch to control these and when I actually build the proper control panel I will also use LED’s to show the position of the turnout.   Now I have to clean up my tools and everything else that has migrated to the top of the layout so I can start laying out each town and also start my Yard. That is going to eat up some more Moles for sure!!!

 

See Ya

Al

2 Responses to “The Moles are Taking Control”

  • Scott:

    How is the epoxy holding up?

  • Allan:

    So far so good Scott. I even like the extra movement you get from the hook and loop (AKA Velcro). Andrew at Proto 87 like the idea of mounting it sideways and is going to see if he can incorporate that idea into the next version. This should make mounting them even easier.

Leave a Reply